15.5.2018

Instructions

Installation guidance for the electric cable

  • Install EXSTRE strain reliving device to the wished location first without shim plates.
  • Tighten with bolts evenly from both sides by using hand tools, until it holds.
  • Check if you need shim plates in order to fill up the gap.
  • Loosen the bolts if needed, and install a required amount of shim plates, and tighten the bolts so, that the shim plates will be tightly squeezed. Final tightening torgue MAX 20NM
  • Ensure the hold, by for example marking the spot of installation. If the strain relieving device slides, add pressure by removing some of the shim plates.


NB! DO NOT USE A BOLT MACHINE TO TIGHTEN UP THE BOLTS! Risk of over tightening the bolts, cracking of the plastic part or the bolts or a seizure of the bolts.


Installation guidance to a water hose

  • Cut the hose from the desired point of installation.
  • Install the support sleeve and attach the hose.
  • Install EXSTRE strain reliving device without shim plates, so that the attachment point sets in the half way of the bolts.
  • Tighten with bolts evenly from both sides by using hand tools, until it holds.
  • Check if you will need shim plates in order to fill in the gap.
  • Loosen the bolts if needed, and install a required amount of shim plates, and tighten the bolts so, that the shim plates will be tightly squeezed. Final tightening torgue MAX 20NM


NB! DO NOT USE A BOLT MACHINE TO TIGHTEN UP THE BOLTS! Risk of over tightening the bolts, cracking of the plastic part or the bolts or a seizure of the bolts.

Questions about the installation guidance? Contact us!